Custom-built French Country home exterior showcasing stone masonry

What Does Historic Home Renovation Cost in Chicago?

What Does Historic Home Renovation Cost in Chicago?

Insights · September 2026

What Does Historic Home Renovation Cost in Chicago?

Real 2026 cost ranges for renovating a historic Chicago home: cosmetic updates, full gut renovations, permits, and landmark review, from our design-build team.

Chicago and the North Shore are full of homes worth saving: Victorian frame houses, solid masonry greystones, 1920s Tudors with leaded glass and plaster walls. If you own one, or you are about to buy one, the first question is almost always the same. What will it actually cost to bring it back?

The honest answer is a range, and the range is wide. Below we walk through the published 2026 figures, what pushes a historic project toward the top of that range, and how our team keeps the number predictable from the first site visit to the final walkthrough.

The short answer

For Chicagoland in 2026, Block Renovation’s cost guide puts cosmetic remodels at roughly $50 to $250 per square foot, and more complex remodels involving structural work at roughly $200 to $400 per square foot or more. The same guide places a typical kitchen renovation at $25,000 to $55,000 and a bathroom remodel at $23,000 to $53,000.

Historic homes tend to land in the upper half of those ranges. Family Handyman’s guide to restoring an historic home cites around $475 per square foot as a general baseline for a serious historic renovation, which it compares to the cost of building a new higher-end house. That figure is a national reference point, not a Chicago quote, but it is a useful reminder: a faithful restoration is closer to new construction in cost than to a cosmetic refresh.

Where your project falls depends on a handful of factors we cover below. For comparison, our guide to what it costs to build a custom home in Chicago and the North Shore lays out new construction ranges from the same kind of published sources.

What drives the cost of a historic renovation

Scope

A kitchen and two baths is a different project from a whole-house gut. Many owners start with a short list and discover, once walls open, that the wiring, plumbing and framing behind them need attention too. Deciding early which of those two projects you are really planning is the single biggest thing you can do to control cost.

Age and construction type

Balloon-framed Victorians, solid masonry greystones and 1920s Tudors each carry their own quirks. Balloon framing often needs fire blocking added between floors. Masonry homes can need tuckpointing and lintel work. Older plaster, original wiring and galvanized plumbing are common in all three, and each one adds labor that a newer house would not need.

Materials that match the original

This is where historic work separates from ordinary remodeling. Family Handyman gives a few concrete examples: historic-style windows with original wavy glass can run well over $1,000 each, compared with a few hundred dollars for a modern vinyl unit, and a slate roof can cost around $150,000 against roughly $15,000 for asphalt shingles, although slate can last far longer. Custom millwork, period hardware and hand-matched plaster follow the same pattern. Every choice to preserve rather than replace carries a cost, and every one is worth making deliberately.

Mechanical systems in old walls

Bringing central air, modern electrical service and updated plumbing into a house that was never designed for them takes planning. Family Handyman notes that high-velocity air-conditioning systems, which are often used in older homes because they fit in small spaces, can cost about twice as much as a traditional unit. Block Renovation places a standard HVAC installation in Chicagoland at $5,000 to $15,000 or more, so an older home with limited chase space can sit well above that.

Review and approvals

If your home is an individual landmark or sits in a historic district, exterior changes may need review before permits are issued. That review can shape what materials you use on the facade, windows and roof, and it adds time to the schedule. Not every older home is in a district, so it is worth confirming your home’s status before design begins.

How to think about the budget

Block Renovation’s guide breaks a typical Chicago renovation budget down this way: about 60 percent labor, about 30 percent materials, 5 to 10 percent design, and a contingency of about 10 percent.

For historic homes, we treat that contingency as essential rather than optional. Old houses hide things. A clear contingency, set at the start and tracked openly, is what keeps a surprise behind the plaster from turning into a surprise on the invoice.

It is also why we walk almost every historic renovation client through the teardown versus renovate decision early. Sometimes restoring the original house is clearly the right call. Sometimes the numbers point the other way. Either answer is fine, as long as you make it with real information before the first wall comes down.

A tax incentive worth knowing about

Illinois offers a Property Tax Assessment Freeze for historic, owner-occupied principal residences. According to the Illinois State Historic Preservation Office, if you complete a qualifying rehabilitation and your eligible expenses equal at least 25 percent of the assessor’s fair market value for the property (house and land) in the year the work began, the assessed value can be frozen for eight years, then brought back to market level over four more. The program has specific eligibility and approval requirements, so check with the State Historic Preservation Office before work starts. We plan the scope with it in mind when a client’s home qualifies.

Why design-build helps on historic projects

On a historic renovation, the biggest cost risk is usually the gap between what was designed and what is actually inside the walls. When the people drawing the plans and the people opening the walls work for different companies, every discovery becomes a round of change orders and a new conversation about who is responsible.

Our designers and builders work on every project together, from the first sketch to the final walkthrough. The same team that measures your house prices it, designs it and builds it. You are never handed off from a salesperson to a designer to a project manager. When we find knob and tube wiring or a sagging beam, the conversation about how to handle it happens once, with the people who will do the work.

You can see how that played out on a real restoration in our Victorian Revival project, and read more about our approach on the historic home renovation page, including our work on Victorian homes and Tudor homes.

Getting a real number for your home

Published ranges are a starting point. The number that matters is the one for your house, your scope and your finish level. The best way to get it is a walkthrough, where our team can look at the structure, the systems and the details worth preserving, and tell you honestly what we see.

If you own a historic home in Chicago or on the North Shore and you are weighing a renovation, request a consultation and we will start with your house, not a template.

Sources: Block Renovation, “The Ultimate Guide to Home Renovation Costs in Chicago (2026)”; Family Handyman, “How Much Does It Cost To Restore an Historic Home?”; Illinois State Historic Preservation Office, Property Tax Assessment Freeze program.

Custom home interior by Amrami Design + Build

Thinking about building?

Bring your lot, your wish list, or just your questions. The first conversation is with the team that will design and build it, and it is free.

Request a consultation

773.842.11428248 Christiana, Skokie, IL 60076
1 Comment
  • Pingback:Kitchen Remodel Cost in Chicago and the North Shore
    Posted at 15:20h, 29 October

    […] house. Older homes often need electrical and plumbing upgrades before a new kitchen can go in. Our historic home renovation cost guide covers what that looks like in Chicago’s older housing […]