
21 Oct How Much Does a Kitchen Remodel Cost in Chicago and the North Shore?

How Much Does a Kitchen Remodel Cost in Chicago and the North Shore?
Kitchen remodel cost ranges for Chicago and the North Shore by size and scope, from rip-and-replace to full gut, plus cabinets, counters, labor and permits.
The first question almost everyone asks us about a kitchen is what it will cost. The honest answer is a range, and the range is wide because “kitchen remodel” covers everything from new counters and paint to a full gut that moves walls, plumbing, and gas lines. This guide breaks that range down by scope and size, explains what moves the number, and shows where the money actually goes.
The figures below come from published industry sources, mainly Block Renovation’s Chicago kitchen renovation cost guide and the 2025 Cost vs. Value data from Hanley Wood Market Intelligence as reported by NerdWallet. They are planning ranges, not quotes. Your number comes from your kitchen, your house, and your design.
The short answer
Block Renovation’s Chicago guide puts a budget kitchen renovation at about $23,000 and up, a mid-grade renovation at about $35,000 and up, and a high-end renovation at about $70,000 and up. Fully custom kitchens with top-tier cabinetry and appliances start around $100,000 in the same guide and can pass $150,000.
National benchmarks line up with that picture. The 2025 Cost vs. Value data reported by NerdWallet puts a minor kitchen remodel at about $28,500, a major midrange remodel at about $82,800, and a major upscale remodel at about $164,100. Chicago and the North Shore tend to sit at or above national averages because labor and materials cost more in large metro areas.
Cost by kitchen size
Size matters less than scope, but it still sets the baseline. Block Renovation’s Chicago guide breaks it down this way:
- Small kitchens (60 to 90 square feet): about $15,000 to $30,000 for budget or mid-grade work, with high-end work starting around $40,000.
- Medium kitchens (90 to 120 square feet): budget work from about $23,000, mid-grade from $35,000 to $50,000, and high-end or custom work from $60,000.
- Large kitchens (120 to 200 square feet): budget work from about $30,000, mid-grade from $45,000 to $60,000, and high-end work from $70,000 to $100,000 or more.
Many North Shore kitchens open to a family room or breakfast area, which effectively makes them large kitchens even when the footprint looks modest on paper.
Cost by scope: refresh, rip-and-replace, or gut
Rip-and-replace
A rip-and-replace keeps the layout. Cabinets, counters, appliances, and finishes come out and new ones go in where the old ones were. Block Renovation’s guide puts this at about $25,000 for budget finishes, up to $50,000 or more. Keeping the sink, range, and refrigerator where they are is the single biggest way to protect a budget.
Gut renovation
A gut renovation takes the room to the studs. It is the right call when the layout does not work, when the walls hide old wiring or plumbing, or when you want to open the kitchen to the rest of the house. The same guide puts gut renovations at about $50,000 for budget-friendly designs, with high-end projects easily exceeding $100,000. In older Chicago and North Shore homes, opening the walls is also when we find out what previous owners left behind, which is why we plan for discovery before demolition rather than after.
If the kitchen is part of a larger project, our whole house remodel guide explains how a kitchen fits into the order of work across the house.
Where the money goes
Cabinets
Cabinetry is usually the largest single line item. Block Renovation’s guide puts stock cabinets at about $100 per linear foot, semi-custom at $150 to $300, and custom cabinetry at $500 per linear foot or more. A kitchen with an island and full-height storage can easily carry 30 or more linear feet of cabinets, so this choice alone can swing the budget by tens of thousands of dollars.
Countertops
The same guide puts countertops at $20 to $200 per square foot depending on material. Laminate sits at the bottom, quartz and granite in the middle, and natural stone with complex edges or large waterfall islands at the top.
Labor
Block Renovation reports kitchen remodel labor at roughly $75 to $150 per hour in Chicago, with general contractor fees typically 10 to 20 percent of the project. Design fees from a separate architect or interior designer add another $5,000 to $20,000 in that guide.
Permits
In Chicago, work that moves plumbing, removes walls, or touches gas lines needs a permit. Purely cosmetic work like paint, counters on existing cabinets, or cabinet refacing generally does not. North Shore villages each set their own permit rules and review timelines; our North Shore permit guide compares them side by side. For projects in the city or in Evanston, see remodeling in Chicago and remodeling in Evanston.
What moves your number
- Moving the plumbing or gas. Relocating the sink or range means new lines, new venting, and often opened floors. It is worth it when the layout demands it, and it is the first place to look when the budget is tight.
- Removing walls. Opening a kitchen often means a load-bearing wall, which means a beam, engineering, and a permit.
- Cabinet tier. Stock, semi-custom, and custom cabinets differ by a factor of five per linear foot in published guides.
- Appliances. Professional ranges, panel-ready refrigeration, and dedicated ventilation can rival the cost of the cabinets.
- The age of the house. Older homes often need electrical and plumbing upgrades before a new kitchen can go in. Our historic home renovation cost guide covers what that looks like in Chicago’s older housing stock.
Why design-build helps a kitchen budget
Most kitchen overruns trace back to the gap between the person who drew the kitchen and the people who build it. A design gets approved, then the bids come in high, and the project goes back to the drawing board or gets value-engineered in a hurry.
Our in-house team works on every kitchen together, from the first sketch to the final walkthrough. Our designers and builders price the design while it is being drawn, so the kitchen you approve is a kitchen you can afford. You work with one team the whole way through, and you are never handed off from a salesperson to a designer to a project manager. Our design-build vs. architect and general contractor guide explains the difference in detail, and our kitchen remodeling page shows the kind of work our team does.
Kitchen remodel costs, answered
How much does a kitchen remodel cost in Chicago? Block Renovation’s Chicago guide puts budget renovations at about $23,000 and up, mid-grade at about $35,000 and up, and high-end at about $70,000 and up, with fully custom kitchens starting around $100,000.
What is the biggest cost in a kitchen remodel? Usually cabinetry, which runs from about $100 per linear foot for stock cabinets to $500 or more for custom work in published guides.
Does a kitchen remodel need a permit in Chicago? Moving plumbing, removing walls, or working on gas lines needs a permit. Cosmetic updates generally do not.
Does a kitchen remodel pay for itself? Rarely in full. The 2025 Cost vs. Value data reported by NerdWallet shows major midrange kitchen remodels recouping about 50 percent at resale, while minor remodels recovered roughly their full cost. Most families remodel a kitchen for how they live in it, not for resale.
Start with a conversation
Every kitchen starts with how you cook, gather, and move through the room. If you are planning a kitchen in Chicago or on the North Shore, request a consultation and our team will walk through your space, your goals, and a realistic budget with you.


Thinking about building?
Bring your lot, your wish list, or just your questions. The first conversation is with the team that will design and build it, and it is free.
Sorry, the comment form is closed at this time.