French country custom home by Amrami Design + Build near Glencoe IL

Where we build · Glencoe, IL

Custom home builders in Glencoe

Design-build for Glencoe’s ravine lots, bluff sites, and the homes that have been here a century.

Interior of Grand Holiday, an Amrami custom home

Building in Glencoe

What it takes to build a custom home in Glencoe

About one in four Glencoe houses has been torn down and replaced in the last thirty years, roughly 800 homes, and the village’s Preservation Commission can delay a demolition but not stop it. So the constraint on a Glencoe build usually isn’t preservation. It’s the ground.

Ravine and bluff lots are what make Glencoe Glencoe, and the village regulates them through a Steep Slope Zone and a Slope Transition Zone that can take a large part of a lot out of play. Buyers routinely discover this after closing: the deep backyard they paid for is mostly unbuildable, and the pool they planned can’t go where the only flat ground is. We walk every Glencoe site with the topographic survey before design starts.

Our work in and around Glencoe

We’ve built homes in Glencoe. That work stays private at our clients’ request or was completed before we began photographing our projects, so it isn’t in our published portfolio. The projects below are the nearest ones you can walk through in photos, and the portfolio has the rest of our work.

View the full portfolio

Leisure Point custom home in Northbrook, twelve minutes from Glencoe

Northbrook · Twelve minutes from Glencoe

Leisure Point

Ground-up custom home: full design-build from lot evaluation to move-in, with a full house tour on the project page.

Chicago · French country custom home

Grand Holiday

The kind of traditional detailing and proportion that suits Glencoe’s older streets.

Grand Holiday French country custom home by Amrami

What building in Glencoe involves

Glencoe’s process is driven by its terrain. Here is what a project there actually involves.

  • Steep Slope Zone.Ravine and bluff lots carry setbacks from the slope edge and restrictions on grading and construction inside the zone. Plans must delineate the zone. Erosion control in and near it is specific, coir wattles, silt fencing, inlet protection, erosion blankets on anything not seeded or sodded, and it’s inspected.
  • The pool problem.Glencoe requires accessory structures, including pools, to sit at least 50% of the lot depth back from the street. On a ravine or lakefront lot, that rear half is often where the Steep Slope Zone is. The result is a variance application to the Zoning Board of Appeals before you can build a pool at all. We’ve seen it granted; we’ve also seen it take months.
  • Engineering on every new house.A Geometric Plan delineating every impervious and semi-pervious surface, and a Grading Plan, are required for all new single-family construction, and sometimes for major additions. Both include runoff coefficient calculations for existing and proposed conditions. This is civil-engineering work that has to be done before the building permit is complete.
  • Setbacks vary by district.In at least one residential district, interior side setbacks are 10 feet and corner side setbacks are 25 feet; a rear lot line abutting a neighbor’s side lot line can trigger the larger number. We confirm the district and the exact figures before the first design meeting.
  • Trees.Construction-related tree removals require a deposit and a replanting plan through the village. Removals outside a construction project need a separate permit.
  • Generators.The village has a specific ordinance on where standby generators can sit relative to setbacks, with four conditions under which one can encroach. Design it in; don’t retrofit it.
  • Preservation.The Preservation Commission reviews demolitions and can impose a delay. In 2025 the village debated tax rebates and permit-fee discounts to encourage owners to landmark rather than demolish; trustees balked at the cost. The rules may tighten. Check before you buy a pre-war home to replace it.
The design-build difference

Why choose a design-build custom home builder in Glencoe

A difficult site punishes the traditional model. When the ravine survey comes back different from what the architect assumed, the builder reprices, the designer’s plan no longer fits, and the homeowner is holding three change orders.

With one team, the survey, the design, and the price move together. Our in-house designers and builders work on every project together, and the number you agree to is built on a plan that’s already been priced by the people who’ll build it.

Amrami Design + Build custom home interior

Questions about building in Glencoe

Direct answers to what families ask us before building or renovating in Glencoe.

How much does it cost to build a custom home in Glencoe?

Custom homes we build start around $250 per square foot for a straightforward design and run to $600 or more at the highest finish levels. In Glencoe the ground drives the number: work near the Steep Slope Zone, the engineering every new house needs and erosion control. Our guide to custom home costs in Chicago and the North Shore breaks it down.

Have you built custom homes in Glencoe?

Yes. That work stays private at our clients’ request or predates our project photography, so the nearest homes you can tour in photos are Leisure Point in Northbrook and Grand Holiday in Chicago.

What is the Steep Slope Zone in Glencoe?

It is the regulated area along Glencoe’s ravines and bluffs, with setbacks from the slope edge and limits on grading and construction inside it. Together with the Slope Transition Zone it can take a large part of a lot out of play, which is worth knowing before you buy.

Can I add a pool on a Glencoe ravine lot?

Often only with a variance. Glencoe requires pools and other accessory structures to sit at least half the lot depth back from the street, and on a ravine or lakefront lot that rear half is often where the Steep Slope Zone is, so the project goes to the Zoning Board of Appeals first.

Can Glencoe stop a teardown?

It can delay one but not stop it. The Preservation Commission reviews demolitions and can impose a delay; about one in four Glencoe houses has been torn down and replaced in the last thirty years. Village-by-village rules are in our North Shore permit guide.

What clients say

Grand Holiday · Chicago

Amrami custom home

Let’s talk about your Glencoe project

Ravine lot, bluff site, or a pre-war home you want to keep: the first conversation is with the team that will design and build it, and it’s free.

Request a consultation

773.842.11428248 Christiana, Skokie, IL 60076 · Twenty minutes from Glencoe